Details

Anti-seismic expansion joints capable of three-dimensional movements and large movements. For 40 mm seismic expansion joints up to 600 mm opening.

Download
Certificates

Please request the technical sheet / certificates here:

imagem9
COR 6.14

All-metal seismic TM / SI expansion joints specially designed to withstand heavy loads. Usable inside and outside. The central parts allow important expansion and contraction movements, as well as vertical and shear movements. Usable for all types of finishes: concrete, sheet, mosaic, etc.

Use: For floor joints up to 200 mm with large movements and heavy loads. Adapted to heavy traffic of rigid wheeled lift trucks (Vulkolan) up to 6 tonnes / axle tires, trucks, forklifts and heavy traffic of light vehicles.

untitled-1
COR 6.08

All-seismic floor expansion joint in aluminum for exterior and interior. The two aluminum upper parts slide between them allowing to absorb three-dimensional movements: horizontal, vertical and shear. Usable for any type of finish: expansion joint for concrete, screed, tiles, etc.

Use: For internal or external joints up to 100 mm. Suitable for heavy traffic of tire forklifts, pallet trucks and heavy traffic lights.

untitled-2
COR 6.20

All-seismic floor expansion joint in aluminum for exterior and interior. The internal aluminum parts slide between them allowing to absorb the three-dimensional movements: horizontal, vertical and shear. Interchangeable aluminum tops with optional nitrile leveling tape. Usable for any type of finish: expansion joint for concrete, screed, tiles, etc.

Use: For joints of interior or exterior floors up to 340 mm. These models can be used for intensive pedestrian crossings and light trucks (airports, supermarkets …), as well as for the passage of light vehicles.

untitled-3
COR 4.02

Expansion joint all in aluminum. For walls and ceilings, with pre-drilled aluminum angles and a central part that absorbs large multidirectional movements. A waterproofing membrane is available as an option. Especially adapted for quality finishes and for large joints with large seismic movements or not.

Use:For vertical façade joints, up to 200 mm opening. (larger sizes available on request)

untitled-4
COR 4.06

Expansion joint for facades, walls and ceilings composed of aluminum angles and an insert. The side angles are covered with cellular foam that allows to compensate for the irregularities of the surfaces. The interchangeable central insert absorbs large multidirectional movements. Gasket particularly suitable for large openings with large seismic movements.

Use: For vertical joints of facades, walls and ceilings up to 350 mm opening. Convenient and easy to install.

untitled-7
COR 6.16

Seismic expansion joint for exterior and interior consisting of two angles and a central part of thick aluminum allowing significant expansion and contraction movements, as well as vertical and shear movements. Usable for any type of finish: expansion joint for concrete, screed, tiles, etc.

Use: For joints of interior or exterior floors up to 250 mm. Suitable for heavy traffic of light vehicles.

untitled-5
COR 4.10

Vertical expansion joint all in metal for stations, airports, shopping malls … These models consist of springs that allow great seismic movements.
We are a family owned and operated business.
Special joint expansion of large seismic movements

Vertical installation: facade, wall and ceiling for opening joints from 50 to 200 mm.

imagem14
COR 4.14

Expansion joint for “false ceiling”, composed of aluminum angles with an interchangeable central insert to absorb large multidirectional movements. Especially adapted for suspended ceilings.

Use: For false ceilings or false ceilings up to 350 mm opening.

imagem18
COR 6.24

Seismic floor expansion joint for large movements, comprising the side angle sections and a central plate made of stainless steel, able to take up expansion and contraction movements, as well as vertical shearing movements. Suitable for all types of finish: concrete, screed, tiling, etc.

Use: For indoor and outdoor floor joints with a gap up to 200 mm (please enquire if more width is required), with large amount of movements. SVF joints are particularly suitable for harsh environments such as the seaside, kitchens, swimming pools, water parks and thalassotherapy spas. Suitable for non-intense traffic of light vehicles, pedestrians and light trolleys.

untitled-9
COR 6.12

All-metal floor expansion joint specially designed to withstand heavy loads: load handling equipment, lorries… Suitable for indoor and outdoor applications. The central elements allow significant expansion and contraction movements, as well as vertical shearing movements. Suitable for all types of finish: concrete, screed, tiling, etc.

Use: indoor and outdoor floor joints with a gap up to 200 mm, with large amount of movements and heavy loads. Suitable for heavy traffic of fork-lift truck on solid tires (Vulkollan), loads of up to 6 tonnes / axle on pneumatic tires, lorries, pallet trucks and intense traffic of light vehicles.

imagem17
COR 6.22

 JDH 6.22 seismic expansion joint and fire stop expansion joint comprises side angle sections and a central plate made of aluminium. It is able to take up large expansion and contraction movements, as well as vertical shearing movements, and is also suitable for all types of finish: concrete, screed, tiling, etc.

Use: The JDH 6.22 seismic expansion joint and fire stop expansion joint can be used for indoor and outdoor floor joints where a gap of up to 200 mm, with significant movement, is present. It is suitable for pedestrian and light trolley traffic..

imagem15
COR 6.26

AKF expansion joint of seismic soil large movements consisting of corners and a central stainless steel tray that allows to absorb the movements of expansion, contraction, as well as vertical and shear movements. Usable in all types of hard floors (mosaics, stones, marbles, etc …), it is also possible to use with soft floors and carpet.

Use: For indoor or outdoor floor joints up to 200 mm with large movements Adapted to pedestrian and light traffic.

SIMILAR PRODUCTS

ksansinus

Industrial joints

500-01

Filling joints

tapa-junta4

Cover joints screw-on

951-150

joints for car parks

Have questions?  We are here to help you!