The EUROCÒDIGO 6 CE 6 standard clearly determines the type of reinforcement reinforcement for masonry according to classes of environmental risks:
Dry environment (indoor) – Reinforcement reinforcement for masonry with galvanized coating
Wet (outside) – Organic Coated armor
Aggressive environment (marine) – Reinforcement reinforcement in stainless steel.
Fisufor® reinforcement armature
It is a prefabricated bed joint reinforcement formed by two parallel longitudinal threads that are joined by a central thread. The central wire forms a beam structure and is welded at the same point along the inside of the longitudinal wires. Therefore, there is no overlap of the longitudinal and transverse threads, and the maximum thickness of the reinforcement is equal in diameter to the longitudinal threads.
The steel used in its manufacture is in accordance with the EN 10020 standard.
Fisufor® It has the CE marking according to the specifications of the standard EN 845-3; 2006 + A1: 2008.
Wire diameter: fisufor® The reinforcement is manufactured with longitudinal wires with diameters of 3, 4 and 5mm and transversal wires with diameters of 3 and 3.7 mm.
Reinforcement width: fisufor® The reinforcement of the bed joint comes in widths ranging from a minimum of 30 mm in height to a maximum of 250 mm.
Reinforcement armature PLUG® Fisufor
Reinforcement Armature GEOFOR® Fisufor
The reinforcement reinforcement for masonry Geofor® is a prefabricated frame consisting of two parallel longitudinal wires that are joined by a central wire. The core wire is welded in the same plane as the inner side of the longitudinal wires, which form a triangular structure. Therefore, there is no overlap of the longitudinal and transverse wires and the maximum thickness of the reinforcement is equal to the diameter of the longitudinal wires. The steel used in construction is in accordance with the standard EN 845-3; 2006 + A1: 2008. Separators INCORPORATED Geofor incorporates in its crossed wires some plastic spacers with cylindrical geometry, whose function is to guarantee the minimum mortar coverings and to facilitate the correct hook-up, as it allows to place the rebar in the factory before throwing it. mortar.
Structure “PLUG” Geofor® has an innovative design that allows overlapping between reinforcement, without any manipulation, maintaining the overlap of the same nominal width of the reinforcement. Ends Geofor parts have a special plug geometrical configuration that allows the 250mm overlap without cutting the wires into shape. Likewise, the cross-sectional wire in which the area is crushed in order to guarantee minimal mortar coatings. SAO DEVICE (National Operator of the Automatic Control System) Geofor devices have placed at both ends of the parts to visually check, after the implementation phase, the reinforced wall amounts correspond to the design and the overlap length is required by regulations.
Fisufor Geofor® has CE marking according to the specifications of the standard EN 845-3; 2006 + A1: 2008.